download pdf: Pyrometerhandbook (657 KB)
	download pdf: Emissivity table (44 KB)

Short introduction:

The Temperature Range:

IMPAC pyrometers measure temperatures from -50 to 4000°C. The selection of the temperature range depends on the application. 
 
 

The Spectral Range:

The material of the measured object demands the correct selection of the optimum spectral range of the pyrometer for a certain application. Therefore the correct spectral range is one of the most important features.


Typical spectral ranges are:

Emissivity

The emission coefficient is the relationship of the emission output of an object to the emission output of a black body radiation source at the same temperature. It is influenced by the object's material and changes with the wavelength, the temperature or other physical values.

The emission coefficient of an object is the most important value when determining its temperature with a pyrometer. If one wants to measure the true surface temperature of an object with a pyrometer one must know the emission coefficient, or emissivity, of the object and enter its value in the pyrometric measuring system.
In principle the emissivity of a material is influenced by wavelength, temperature, etc.. Therefore emissivity tables can only give an indication of the exact emissivity for different applications.

A table with emissivities of various materials ca be downloaded here! (44 KB) 
 
 

The Field of View:

The dimensions of the measured object determine the required spot size of the pyrometer. At least the spot size has to as big as the measured object to achieve a correct temperature measurement. The spot sizes are dependent on the type of pyrometer and measuring distance, they can be calculated using the distance ratio or field of view (FOV).
FOV = measuring distance / spot size
(e.g. 240 : 1 means:
in a distance of 1200 mm the spot size is 5 mm).
Example:

Response Time:

The response time is the time interval between the instant of an abrupt change in the value of the measuring temperature and the instant from which the measured value of the pyrometer remains within specified limits.
 
 

Sighting: For easy alignment of the pyrometers to the measuring object, different sighting systems are available: - LED aiming - Laser aiming - View finder - TV camera

Laser targeting light:

For easy alignment to the measuring object the pyrometers can be equipped with a laser targeting light. This is a visable red light with a wavelength between 630 and 680 nm and a maximum power of 1 mW. The laser is classified as product of laser class 2.
 
 

The Design:

IMPAC pyrometers are designed for the use in industry under rough conditions. The housings of the fixed pyrometers are made of stainless steel or die cast aluminum with the protection class of IP65. The housings of the portables are made of robust plastics. Available are:

- Compact pyrometers with integrated lens
- Fibre optic pyrometers (LO)
- Portables

Output:

Different pyrometers provide different outputs. Analog outputs and digital interfaces are available. Some pyrometers have various switchable outputs, the output at the IN 3000 has to be selected when ordering.

- Analog output 0 ... 20 mA or 4 ... 20 mA
- Analog output 10 mV/°C
- Analog output 0 ... 5 V
- Analog output thermo couple type J or K
- Digital interface RS232 or RS485
- Profibus-DP